PRECISE ASSEMBLY PROCESS

齿轮箱/Gear box

       轴承、密封均为水平剖分式结构，吊起齿轮箱上盖即可维护，设备检修方便简单 转子轴采用推力环结构，无须推力轴承，结构简单，传动效率高，可靠性更高。

Horizontal split type for easy maintenance of the bearings and shaft seals.Thrust collar instead of thrust bearings. Which makes the structure simpler and increase the transmission efficiency and reliability.

迷宫式密封/Labyrinth seal 

      非接触式设计，无磨损，零故障，寿命长，更换成本低，无需密封仪表气。采用水平剖分设计，维护检查方便。

The gas & oil seal is labyrinth type, which has no contact to the shaft., no abrasion, long life, and low maintenance, no consumption of instrument air, and also, horizontal split makes  easier maintenance.

轴承/Bearing

       五瓣式可倾瓦，自动调芯能力强，抗冲击耐喘振,高导热高强度CC瓦块，有效降低轴承温度，提高转子系统长效可靠性。

Tilting pad journal bearing realize high-speed and stable operation.Pad tilt will self-adjust.when the bearing load changes.CC pad of high heat conductivity and high strength can decrease the bearing 

temperatureand promote the stability of the rotor system.

扩压器/Diffuser 

       扩压器将气体的动能转化为静压能，与叶轮匹配设计的扩压器才能例整机高效。MA 工艺表面处理，获得HV1300以上的表面硬度，持久耐磨耐腐蚀，提高扩压3倍使用寿命。

The speed energy of air is efficiently converted into pressure energy by the diffuser. Analysis with the impeller provides high efficiency.

The surface hardness can reach HV1300 for MA treating method is adopted .at the same time the life span of the diffuser will expanded to 3 times